Maintaining and repairing your own plumbing is an essential part of home improvement, but understanding it and buying the right equipment can be tricky. There are lots of things to consider for your particular plumbing job. Here are some steps you can take to ensure you get started with your own plumbing jobs.
If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.
Never reach into a garbage disposal that you think isn’t working. Garbage disposals always pose a possible threat, even when powered off or non-working all together. You can look online to find the diagram for the disposal that you have.
At least once a year remove the faucet aerator and clean the screens. This helps it properly function. The function of a faucet aerator is to allow for an even flow of water and to conserve water. Be sure to clean out the aerator and you’ll notice a these things working.
When running your garbage disposal, always use a lot of cold water. Cold water will allow for the food particles to be properly disposed of while keeping the blades sharp. Avoid using hot water, as this will liquefy grease, causing it to build up in the drain and obstruct your pipes.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
Make sure you get a good recommendation or check the references before you hire a plumber. With good recommendations, it will assure that you are hiring an experienced plumber. If the experienced plumber is professional, he will have a fully stocked truck and be able to complete most small jobs in one visit.
There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.
As you read, plumbing can be an incredibly important aspect to your current and future home improvement and so is understanding all the different techniques and equipment. This is so it makes it easier for you to understand what you need for your plumbing jobs. Following the tips in this article is a very good starting place.